Last updated:
A golf grip fitting kit can make sense when you already have a suitable workspace and expect to regrip clubs repeatedly. A professional fitting is often the simpler comparison for one or two clubs, an uncertain grip size or a putter that needs careful alignment. Compare the entire first job: replacement grips, tools, supplies, delivery and the service included in a workshop quote. The word “kit” does not mean every necessary item is supplied.
Affiliate disclosure: We may earn a commission from qualifying purchases made through affiliate links, at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.
Guide checked: 8 September 2026. This guide compares the linked manufacturer and retailer information. We have not carried out hands-on product testing. Check the exact specification and current offer before buying.
Table of Contents
Compare what you are paying for
| Option | What is established | What still needs checking |
|---|---|---|
| Pro Golf Workshop fitting kit | 14 tape strips, rubber shaft clamp, 4oz/8oz solution choice | No grips, bench vice or blade listed |
| Loose Tour Velvet grip | Replacement grip; selected size and quantity matter | Fitting supplies and labour are separate |
| Professional regripping | A service defined by the shop’s quote | Exact grip, tape work, labour, timing and extras |
The supplies to compare
Pro Golf Workshop kit: consumables and a clamp
The named merchant’s fourteen-club kit lists fourteen double-sided tape strips, a rubber shaft clamp and a choice of 4oz or 8oz grip solution. These are specific supplies for an installation job. The listed contents do not include replacement grips, a bench vice or a removal blade, so the kit cannot be compared directly with a price that includes a new grip fitted to your club.
Start by checking what you already own and whether it is suitable for the task. An improvised setup that cannot hold the shaft properly is not a useful saving. Read the selected solution and grip manufacturer’s instructions before ordering supplies, including handling, ventilation and drying requirements. This article compares purchases; it does not replace those product-specific installation instructions.
Check Pro Golf Workshop fourteen-club fitting kit at Pro Golf Workshop
Loose Tour Velvet grips: only one part of the bill
A loose Golf Pride Tour Velvet provides the replacement grip, not the fitting service. The previously verified Amazon UK selection was a black round 60-butt option. Its dynamic listing includes different choices, so check the model, selected size and number of grips you will receive. Do not assume that a main image showing several grips establishes the quantity in your basket.
Agree the finished size before ordering enough for the whole bag. Core dimensions relate to shaft fit, while the installed result also depends on the build-up. If you cannot describe the specification you want, paying a professional to establish it can be more useful than buying a larger bundle. Keep the putter separate when its grip or alignment needs differ.
Make two complete cost lists
For DIY, list the grips, kit or separate consumables, any suitable tools you must buy, delivery and the number of clubs you intend to finish. Separate equipment you can reuse from supplies that are consumed. That makes the first job and later jobs visible as different calculations. A tool purchase belongs in the first-job budget even if you expect it to last for years.
Use the dated workshop examples in our UK regripping-cost guide as a starting point for the fitted quote. For the home-fitting list, check tape compatibility and quantities before ordering supplies.
For a workshop, request a quote naming the exact grip and finished specification. Ask whether it includes removing old tape, the agreed build-up and fitting, and whether supplying your own grips changes the charge. A fitted price is only comparable with another fitted price when both cover the same work. Current written quotes are more useful than an assumed national average.
Count the clubs that need work
Look at each club rather than replacing a bundle-sized quantity automatically. A frequently used wedge may be more worn than a long iron that rarely leaves the bag. If the job is limited to one club, delivery and first-time tool purchases may dominate the DIY comparison. If several sets need attention over time, reusable equipment can become more relevant.
Write an actual contents list. For example, 6, 7, 8, 9, pitching wedge and sand wedge are six clubs, not seven. A thirteen-grip bundle also does not tell you whether your putter should use the same replacement. An accurate club count prevents arithmetic errors and makes it easier to tell whether an advertised quantity is useful or simply more than you need.
When a professional adds value
A workshop is useful when you are uncertain about size, extra tape, shaft compatibility or putter alignment. Bring a club that feels right and explain what you want to repeat or change. The aim is a repeatable specification, not merely a new surface. Ask the fitter to record the chosen model and setup so future replacements do not depend on guessing what was installed.
There is also a practical convenience comparison. If you have limited space, little time or no secure way to hold a club, the service may solve more than the installation itself. Establish turnaround and the time required before play. A quick fitting appointment does not necessarily mean the club is immediately ready for a full swing. Follow the fitter’s and chosen product’s instructions.
When DIY is a reasonable project
DIY is worth investigating when you have suitable equipment, can follow the relevant instructions and expect to maintain clubs repeatedly. Before starting, identify the correct grip and supplies for the actual shafts. Check that you understand how to avoid shaft damage and how to handle the chosen solution. If a club has an uncertain condition or unusual requirement, get advice before treating it as a practice job.
Do not make the first attempt under pressure just before a round. Allow time to read the instructions, prepare the area and leave the completed work for the specified period. Keep your order details and product instructions for the next job. The value of reusable equipment comes from a process you can repeat correctly, rather than from buying the biggest kit available.
Choose the route, then compare the current price
Get a workshop quote first if you are unsure about the specification or only need a small repair. Price a DIY basket when you know the grips and have a realistic list of tools and supplies. Our UK regripping cost guide explains the distinction between loose grips and fitted examples; refresh the actual figures for your own job.
The sensible choice is the one that delivers the agreed grip specification with a complete, understood cost. Neither a kit nor a new grip can promise extra distance or a lower handicap. A comfortable, secure replacement is useful maintenance in its own right.