As an Amazon Associate I earn from qualifying purchases.
For FootJoy and ECCO shoes covered by the checked care guidance, use room-temperature drying and avoid added heat. A powered boot dryer’s general sports-shoe claim does not override the golf-shoe maker’s instructions. Match any drying accessory to the exact pair before buying.
Research-based buying guide, checked 13 September 2026. We have not carried out hands-on testing. Product details come from the linked official sources; the comparison and trial suggestions are our editorial advice.
Table of Contents
The shoe instructions settle the first question
FootJoy’s UK shoe-care guide recommends room-temperature air drying. For soaked shoes it describes newspaper for eight to ten hours, followed ideally by cedar shoe trees, and says to remove an insole only if it is not glued in. It specifically warns against blow-dryers and external heat sources, as well as direct sunlight.
ECCO’s UK care guidance likewise says to dry footwear at room temperature using paper or shoe trees, and not to use dryers, heaters or other heat sources. A waterproof shoe still needs appropriate care after a wet round. These instructions provide a clearer basis than a general claim that low heat is always harmless.
Two accessory approaches have different implications
The Therm-ic Refresher manufacturer specification describes warm-air drying, adjustable arms and a one-to-three-hour timer. The Sidas UK Therm-ic store provides a UK product route, but its listing showed sold out when checked. Neither source establishes approval to use heated drying on the FootJoy or ECCO shoes above.
Drysure describes silica-based inserts that operate without heat or electricity. This is a different approach from a warm-air appliance, but it still needs to fit the shoe without pressure or conflict with its care instructions. We have not independently tested drying speed, odour reduction or microbial claims for either accessory.
| Approach | What it does | Decision for your shoes |
|---|---|---|
| Room-temperature air drying | Follows the checked shoe-brand routine | Start here for the named guidance |
| Paper and suitable shoe trees | Absorption and shape support as directed | Use the maker’s method and avoid overstuffing |
| Non-powered drying insert | Uses a moisture-absorbing material | Confirm fit, reactivation instructions and shoe compatibility |
| Warm-air appliance | Adds powered warm airflow | Use only if the exact shoe maker permits it |
Set up a place for shoes before the wet round
Choose an indoor, ventilated location away from direct heat and sunlight, with a surface that can be cleaned. Keep the shoes out of a closed boot bag once you get home. Have the appropriate cleaning materials ready, along with paper or suitable trees where the manufacturer recommends them.
Remove mud using the shoe’s approved cleaning process before starting the drying routine. Loosen the closure and remove only parts designed to come out. Do not pull up a glued footbed or put an entire shoe in a machine simply because another model’s removable insole can be washed. The FootJoy model guide helps distinguish those exact styles.
Do not confuse a timer with a dry shoe
An appliance stopping after three hours does not prove that a saturated golf shoe is dry, and a manufacturer’s approximate newspaper interval is not a guarantee for every material and soaking level. Inspect the pair before wearing or storing it, and follow the relevant instructions if it remains damp.
If you play on consecutive days and shoes regularly remain wet, consider a second suitable pair so you can follow the normal drying process. That is a practical equipment choice, not a reason to expose the first pair to unapproved heat. Keep the second pair’s care instructions separate if its construction differs.
Check accessory upkeep and electrical details
For an allowed powered appliance, verify the UK supply, plug, operating instructions and placement requirements before ordering. Do not assume an EU model listing includes the appropriate UK configuration. For absorbent inserts, read how they are maintained or reactivated and remove them from footwear before any separate process that uses heat.
Do not buy on claims of preventing mould or eliminating germs unless the evidence answers that specific question. Drying, cleaning and repairing a leaking shoe are separate tasks. If the same area repeatedly gets wet, inspect the shoe and clothing overlap and seek the maker’s advice. Our ECCO guide covers model identity and weather construction.
The purchase that follows from the evidence
For the checked FootJoy and ECCO instructions, a suitable room-temperature drying setup is the supported starting point. Treat warm-air dryers as a conditional option for footwear whose maker explicitly permits them. The shopping links focus on basic shoe-care accessories; no link should be read as approval to heat an otherwise unsuitable pair.
These affiliate links open Amazon UK search results for the named equipment or accessories.
Check the exact model, generation and seller. Results can include alternatives; a search link does not confirm availability. Use the official supplier links for specialist products and services.
Sources and how to use this guide
Read the linked manufacturer or service information alongside the exact item offered to you. Specifications describe the named model; an individual build, package or previously owned item may differ. Confirm the complete order before paying. We have not verified a universal performance winner or promised stock availability.